Changzhou Shisheng Machineries Co.,Ltd.
Changzhou Shisheng Machineries Co.,Ltd.
Add to Cart
Tiltable Designed Automatic Spray Coating Machine Uniformed Paint
A manual type of DIP and Spin machine can be provided for economic installations. Typical load capacity if the basket is 45 to 55 Kgs.
The machine is capable of producing 30 Tons of production every month.
The machine is supplied with a programmable control panel allowing following parameters to set :
| Main Parameter: | ||||||
| Centrifugal Motor Power: | 7.5kw | |||||
| Installed Capacity: | 28 KVA | |||||
| Max Loading: | 160kg (Including the Basket ) | |||||
| Max Centrifugal Speed: | 320r/min | |||||
| Min Centrifugal Speed: | 5r/min | |||||
| Tilting Obliquity: | 75° | |||||
| Centrifugal Speed/Tilting: | 10~40r/min | |||||
| 1.1 | Rail Transfer and unloading Unit | |||||
| Max Transfer Weight: | 160kg (Including the Basket ) | |||||
| Transfer route: | 1450mm | |||||
| Unloading Max Angle of Rolling: | 180° | |||||
| 1.2 | Hydraulic & Oil Press Supply Unit | |||||
| Function: | Supplying hydraulic power to the coating machine | |||||
| Max Pressure Supply: | 5MPa | |||||
| Max Working Flow: | 24L/Min | |||||
| 1.3 | Controlling & Operating System | |||||
| Data/Processing Storage: | 2M (5000 ~8000pcs coating processes can be stored) | |||||
| Operation Panel: | Touch Screen | |||||
| Language: | English & chinese Language | |||||
| 1.4 | Basket | |||||
| Function: | Loading workpieces for dipping & spinning | |||||
| Diameter of Basket: | Φ800 mm*500 mm | |||||
| Lated Loading: | 120kg (Max) | |||||
| Weight: | 48kg | |||||
| 1.5 | Dip / Pumping Barrel with Cooling jecket | |||||
| Function: | Stirring & filtering to keep the solution in good working condition. | |||||
| Max Loading: | 360 L | |||||
| It can be linked with a chiller. | ||||||
| 1.6 | Dip Barrel Lifting Platform Unit | |||||
| Function: | Lifting the Dip/pumping Barrel to the dipping position | |||||
| Lated lifting capacity: | 850kg | |||||
| Lated height of lifting: | 1000mm | |||||
| 1.7 | Lift-weight-loading Unit | |||||
| Function: | Lift and load the workpieces into the basket , according to the pre-setting weight data. | |||||
| Power: | 1.5kw | |||||
| Max Lifting: | 500kg | |||||
| 1.8 | Linking Conveyor Feeder | |||||
| Function: | Spreading and forwarding the workpieces onto the mesh belt of the furnace | |||||
| Power: | 0.75kw | |||||
| Effective Width of Mesh Belt: | 800mm | |||||
| Forwarding method: | Program-controlled Receiving parts from the coater with high speed and unloading the parts onto the belt of furnace with low speed | |||||
| Woking Conditions of the LINE | ||||||
| Woking Site | Inside ( Free from corrosion and combustible gas | |||||
| Ambient Tempreture | 5-40℃ (For the LINE only . Please contack your supplier for solution. | |||||
| Ambient Humidity | 35%RH-85%RH (For the LINE only . Please contack your supplier for solution . | |||||
| Power | AC 380V±10%,50HZ±1%, 3 phases 5 wires | |||||
| Compressed Air | 3 m3/min, Pressure≥6.5-7Kgf/cm2, Oleaginousness ≤0.1PPM, | |||||
| Water |
Pressure ≥2-4 Kgf/cm2
|
|||||